GBB (Green Blue Bubble) System

Fine bubble x Energy saving, Water saving,
Reduction environmental impact ===> SOLUTION

GBB (Green Blue Bubble) system is used in a variety of industries.
It is also characterized by its ability to scale up from small to large.
With its options, we provide extensive follow-up services from process control, monitoring, etc. to periodic maintenance.

Textile and animal hair cleaning
Improving cleaning efficiency

FJP-150　150m3/Hour

Air fine bubbles are generated in the plant’s storage tank (20 m3) and provided to the plant’s cleaning water to improve cleaning efficiency.
This reduces the number of cleaning processes and the use of chemicals, and provides the same level of quality and finish as before.

Effect: 180 m3/day animal hair manufacturing plant

Water savings: approx. 6,500 m3/year

Heavy oil A: approx. 18 kL/year

CO2 reduction approx. 52 t/year

Plant factory

Promotion of plant growth

FJP-3 50L/min

Fine bubbles of Oxygen are provided to the nutrient solution tanks of hydroponic cultivation to increase the weight of lettuce.
Oxygen PSA provides hydroponic beds with DO of approx. 15 mg/L.

Effect: 2,000 bags/day lettuce production plant

Monthly shipments: Raised 10-15% or more

Improved individual rubberization and reduced number of discards

Tanning wastewater treatment plant
Reduced hydrogen sulfide (bad odor)

FJP-6　100L/min

Because of the high concentration of hydrogen sulfide in the incoming wastewater, the concentration of hydrogen sulfide is rapidly reduced by aeration with oxygen fine bubbles.
Provides a safe working environment.

Effect: Hydrogen sulfide concentration

50ppm → 5ppm or less

Improvement of bad odor

Wastewater treatment facility
Microbial activity

FJP-300 300m3/Hour

Provides highly concentrated oxygen fine bubbles to further activate microorganisms. Ability of purification is increased, energy is saved, and sludge volume is reduced.
For wastewater treatment facilities with high annual industrial waste costs due to sludge, the impact of running cost reduction is also high.

Effect: Wastewater treatment facility with 200 m3/day

Reduction of BOD/COD by about 15-20

Sludge (industrial waste volume): 20-30% reduction

Metal manufacturing plant
Degreasing

FHP-100　100L/min

Highly concentrated fine bubble water is used to improve the finish (degreasing) of metal processing plants.

We provide fine bubble water by using a pressurized pump in a conventional system.

Effect: Use of 80 m3/Day of water

Water savings approx. 2,000 t/year

Heavy oil A approx. 8 kL/year

CO2 reduction approx. 20t/year

Control system

Controls fine bubble system.

The system performs time control, concentration control, Web monitoring, and remote monitoring.

The system performs detailed control, from stopping and responding in case of abnormality, to providing information for Web display and issuing e-mail alerts.

Video of Fine Bubbles being generated

Design Philosophy – Green Blue Bubble’s “One-Stop Solution”

01 Scale-UP Design

Evidence data obtained from small tests prior to introduction is scaled up to the introduced system as it is.
Even after scale-up, Fine Bubble’s functions are maintained.

02 Sensing/Control

The system is controlled by various types of sensing technic.
Failsafe design provides stable system operation.

03 Monitoring

Data from each sensor can be remotely monitored to check system operation status.

04 Analysis

We have our own fine bubble analyzers to check system quality through the analysis of fine bubbles.

05 Installation

We perform everything from the installation to the adjustment of the fine bubble system.
We also provide post-installation evaluations (degreasing tests, etc.) and provide advices on improvement for the production process efficiency.

06 After follow-up

We provide follow-up services after installation.
We follow up your solution for a long while by conducting periodic inspections (replacement of consumables, sensor cleaning, etc.) and proposing functional power-up.

Bubble Generator Lineup

Bubble Generator has a wide range of lineups from small to large scale.

■FoamJet / Large Volume Type (number density N x 10 million pieces)-1

Model type	FJP-6	FJP-12	FJP-24	FJP-40
Processing volume	6 m3/Hour	12 m3/Hour	24 m3/Hour	40 m3/Hour
Gas supply	3 L/min	6 L/min	10 L/min	20 L/min
Inlet pipe size	1 inch	1 1/4 inch	1 1/2 inch	2 1/2 inch
Outlet pipe size	1 1/4 inch	1 1/2 inch	2 inch	4 inch
Pump Output	0.4 kW	1.2 kW	2.2 kW	3.7 kW
Size LxWxH (mm)	137 × 180 × 670	160 × 220 × 758	510 x 635 x 1530	455 x 790 x 1765
Weight	3.5kg	6kg	60kg	120kg

■FoamJet / Large volume type (number density N x 10 million pieces)-2

Model type	FJP-60	FJP-100	FJP-150	FJP-300
Processing volume	60 m3/Hour	100 m3/Hour	150 m3/Hour	300 m3/Hour
Gas supply	30 L/min	40 L/min	60 L/min	100 L/min
Inlet pipe size	4 inch	4 inch	6 inch	8 inch
Outlet pipe size	4 inch	6 inch	6 inch	10 inch
Pump Output	5.5 kW	7.5 kW	15 kW	22 kW
Size LxWxH (mm)	490 x 865 x 2070	1140 x 970 x 2400	1230 x 1130 x 2705	1410 x 1380 x 3540
Weight	270kg	380kg	470kg	670kg

*The size and weight of the generator itself are indicated for FJP-6 – FJP12.
*The total size and weight of the pump and plinth are indicated for FJP-24 and larger generators.
*Gas supply volume and pump output are for reference only.
Each system will be designed according to the conditions of the site.

　
FJP-12 FJP-150

Mechanism of Bubble Generation

The FOAMJET generates fine bubbles by passing water through the FJ box and circulates the treated water to increase the concentration of individual particles.

Since the general-purpose pump is used in the system, it is often applied for large-capacity applications.

■Fabby High concentration type (Number density N x 100 million pieces)

Model type	FJN-15I-N04Z	FJN-25I-N15Z	FJN-50I-U37Z-A	FJN-50I-S150Z-A
Processing volume	10 L/min	50 L/min	100 L/min	340 L/min
Gas supply volume	0.5 L/min	2.5 L/min	5 L/min	17 L/min
Inlet pipe size	1/2 inch	1 inch	2 inch	2 inch
Outlet pipe size	1/2 inch	3/4 inch	1 1/4 inch	2 inch
Power consumption	0.6 kW	2 kW	3.7 kW	17 kW
Size LxWxH (mm)	350 × 450 x 480	715 × 865 x 1055	1010 × 1000 x 1380	930 × 1570 x 1750
Weight	30 kg	180 kg	300 kg	750 kg

Fabby generates fine bubbles in a three-step process that consists of a pressurized pump, FJ box, and nozzle.
By circulating the treated water, the number of individual bubbles is further increased.
Both ultrafine bubbles and microbubbles are generated and used in the applications of highly efficient reaction.

Green Blue Corporation

Phone：81-45-322-3155　Fax：81-45-410-3460
E-mail：sales@greenblue.co.jp

to Inquiry form